Kirjeldus

M-Tac has developed the new M-TAC STURM ELITE GEN.II raid backpack, which will allow you to carry everything you need for a short term self-sufficient stay in the field. Made of Cordura 500D and Cordura 1000D – a high-quality and wear-resistant material that will provide protection against mechanical damage and a long service life. The design of the backpack provides for one main compartment, which opens in a style of a suitcase and will hold all your essentials. This backpack is the new generation of STURM ELITE. Taking into account feedback and comments from the military, the manufacturer added two special locking straps (manufactured by Murdock Webbing) that can be used block the zips from opening fully and provide access to the backpack from the top. They also act as a means to reduce the volume of the backpack by tightening it. The fixing straps are fastened on the front of the backpack with the help of Fastex (manufactured by Woojin). Their rear parts are attached with the help of carabiners to the side of the backpack, namely to the MOLLE Laser Cut system. The fixing straps can be attached to these panels at different levels, thereby adjusting how far the backpack can open. Inside there is a compartment for a drinking system, and on top there is an opening for a drinking tube. On the flap of the backpack there are two mesh pockets, which are suitable for placing EDC kit. On the front of the backpack there is a lacing made of elastic cord, which makes it possible to carry a jacket, a camouflage net or similar. It also has a Velcro panel for attaching your favorite IDs and patches. The MOLLE Laser Cut system is located on the front and sides of the backpack (made of Cordura Squadron). There you can attach not only fixing straps, but also any additional equipment, which increases the carrying capacity of the backpack. The back is reinforced with special plastic that holds its shape well and does not deform under load. Webbing is sewn onto the bottom for attaching additional equipment. The Sturm Elite backpack is perfect for use in the field and will definitely appeal to all connoisseurs of tactical equipment. Materials: Cordura 500D, Cordura 1000D, Cordura Squadron; Side pockets – made of elastic material Flex (90% nylon, 10% elastane). Hardware: YKK, WJ Features: – MOLLE LASER CUT system; – The main compartment with a section for a drinking bottle; -On the top of the backpack there is a hole for a drinking tube; -Two mesh pockets on the flap; – The back is reinforced with special plastic; – Below there is webbing for attaching additional equipment; – Velcro on the front for IDs and patches. Volume: 15 liters Dimensions: 43 x 26 x 11 cm Due to its unique qualities, Cordura is widely used in tactical equipment for military, law enforcement, and special forces. It is mainly used in materials with a 1000d and 500d linear density. Linear density is the ratio between the weight of the fabric and its length. It is measured in denier. This unit of measurement is mainly used for nylon fabrics. So, the higher the index, the more dense and heavy the fabric. The physical and technical characteristics of CORDURA 1000D are very high, it has a very high breaking load of about 3000 N and a tearing load of about 150 N. The abrasion resistance is more than 50000 cycles. It is used for clothing, bags, and pouches. Products made of CORDURA will stand the test of time and distance. CORDURA stands for durability, reliability, and style. In terms of durability, it is beyond competition. Woojin plastic® – is a world renowned company for the production of quality plastic fittings. Woojin plastic® – is a Korean company founded in 1979. The company39;s headquarters were in Korea until 1993, after which it moved to the United States. Since then, the company has grown even faster. Thus, in two years, the company39;s exports grew to 1 million dollars and continued to grow. In 2002, the company obtained international ISO 9001 certification. Today Woojin is one of the world39;s best manufacturers of plastic fittings for the military, climbers and alpinists. Very important components in the creation of Woojin plastic is ACETAL. It gives the material such qualities as: hydrophobicity, wear resistance, strength, rigidity and form stability. Distinctive feature in comparison with other materials is also its dimensional stability, so all components made of ACETAL are identical. ACETAL is also not replaceable in humid environments; its quality is not a bit worse compared to polyamide. The YKK company is a world leader in the fastening production. It produces 90% of all fasteners at 71 factories around the world. This is a group of Japanese companies whose trademark was registered almost 70 years ago. YKK is translated from Japanese as “Yoshida’s Factory” – this was the name of the company39;s founder, who opened the production of fasteners for clothes in the 1930s. Success was achieved thanks to cooperation with leading clothing brands and appliance of particularly strict quality standards. In addition, for a very long time, the machine for the production of high-quality fasteners was kept in the strictest secret. This helped the company quickly overtake its main competitors.